Top 10 Best Miter Gauge For Dewalt Table Saw : Our Recommendations in 2023

Are you looking for the Miter Gauge For Dewalt Table Saw Reviews? You might find it difficult to determine which products are best to buy. This confusion occurs due to the different types of products that are present in the market. No need to worry because we are here to help you find Miter Gauge For Dewalt Table Saw Reviews, we have put together a list of products that can be just what you need.

Comparison Chart for Top Miter Gauge For Dewalt Table Saw

Related Posts
Top 10 Best Air Purifier For 3D Printer in 2023 Top 10 Best Air Purifier For Toxins in 2023 Top 10 Best Air Purifier For Multiple Chemical Sensitivity in 2023

Our Recommendation on the 10 Best Miter Gauge For Dewalt Table Saw

1. KREG KMS7102 Table Saw Precision Miter Gauge System, Blue

Features:

• Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
• Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
• Microadjuster allows additional angle adjustment to 1/100th degree
• Positive stops at 0, 10, 22-1/2, 30 and 45-degrees; limited lifetime warranty
• Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver

Additional Info:

Color	Blue
Height	6.25
Width	2.63
Length	25.25
Weight	6

Check Price

---

2. Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

Features:

• Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
• Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
• The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
• The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
• The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.

Check Price

---

3. DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

Features:

• Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods
• Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM
• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• Rolling stand designed for easy set up and breakdown with excellent stability
• Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual

Additional Info:

Color	Yellow/Black/Silver Table saw/stand
Height	31
Width	24.5
Length	31
Weight	110

Check Price

---

4. Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc

Features:

• The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
• To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
• The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
• The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
• If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.

Check Price

---

5. POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

Features:

• PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts
• FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts
• INCLUDES: (1) Miter Gauge for Table Saw
• UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots.
• FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit.

Additional Info:

Height	2.5
Width	4.75
Length	18.94
Weight	2.58

Check Price

---

6. Porter Cable 514007535 Miter Gauge Assembly

Features:

• This is a Porter Cable replacement part
• Fits various Porter Cable models
• OEM Part Number 514007535
• This is an O.E.M. authorized part
• Part Number 514007535

Additional Info:

Height	1
Width	1
Length	1

Check Price

---

7. DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779)

Features:

• Efficient dust collection system captures over 75% of dust generated
• 2-inch x 14-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 10-inch dimensional lumber at 45 degree
• Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw
• Oversized, high visibility bevel scale with positive stops.
• The mitre saw has a precise miter system and machined base fence support
• Bevels 0 degree – 48degree left and right
• Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops
• Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings for accuracy and durability
• Tall sliding fences support 6-3/4-inch base vertically

Additional Info:

Color	Silver Miter saw
Height	17
Width	17
Length	21
Weight	56

Check Price

---

8. DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)

Features:

• Power: 15 Amp, 5800 rpm motor
• Guaranteed tough: Metal roll cage ensures job site durability
• Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
• Variety of cuts: 24.5 inches of rip capacity for ripping 4×8 plywood or OSB sheets
• Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use
• Portability: Compact size for ease of transportation and storage

Additional Info:

Color	Yellow
Height	13
Width	22.75
Length	22.75
Weight	54

Check Price

---

9. LEXIVON Aluminum Miter Saw Protractor | 7-Inch Rust Proof Angle Finder Featuring Precision Laser Engraved Scales (LX-230)

Features:

• DO IT RIGHT THE FIRST TIME – Perfect for crown molding, trim work, plumbing, and a variety of other carpentry applications
• DESIGN – Internal Teflon O-ring mechanism swivels during operation and ensures smooth & precise read on inside/outside corners
• ACCURATE – Crafted from CNC-machined Anodized Aluminum Alloy Steel; Features easy-to-read precision laser engraved scales
• FORGET ABOUT THE GUESSWORK – Two scales transfer your work angle directly to the miter saw for an accurate Miter cut, and Single cut

Additional Info:

Height	0.6
Width	2.5
Length	7.1

Check Price

---

10. REEKON M1 Caliber Measuring Tool for Miter, Chop, and Band Saws – Eliminates Need to Measure & Mark Materials, Reduces Cut Time and Increases Safety, Measures Flat & Round Materials

Features:

• A BETTER WAY TO MEASURE – The M1 Caliber is a fully integrated, patent-pending, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, LCD screen.
• QUICK AND EASY SETUP – Clamp to your saw fence, release the arm, input your blade thickness and begin to cut. Perfect for professionals, contractors, woodworkers and other tradespeople. The M1 will provide the most accurate read on smooth materials.
• COMPATIBILITY – Displays both English and Metric measurements and is compatible with most miter, cut-off, chop and vertical band saws. Make miter, bevel, compound, and straight cuts on a variety of materials ranging from boards to composites to pipe.
• INCREASED SAFETY – Whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location.
• DIGITIZE YOUR MITER SAW – Using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools. The M1 Caliber eliminates the need for a tape measure and pencil.

Additional Info:

Height	3
Width	4.5
Length	6.1
Weight	1

Check Price

---

Best Miter Gauge For Dewalt Table Saw Buying Guide

Now, when you do research prior to buying the Miter Gauge For Dewalt Table Saw Reviews, there are certain things you need to consider. Because these considerations come into play by ensuring that you do not end up with the wrong choice. Be sure to check these factors before making a purchase!-

1. Brands: While there are numerous brands on the market, the truth is not all of them can give you the features you may need. We’ve done the legwork of locating the most reputable brands for you. Choosing from these, you’ll be much less likely than going to a store and grabbing something without considering the brand and everything behind it.
2. Durability: Durability is one of the primary features which are important for most products. They don’t often have long lifespans and require replacement every now then. Before you buy any product from the store, make sure you know about the material well. Sometimes, many people buy the wrong product even after spending a lot of bucks. Why do they do that? Probably because they don’t know which material ensures ultimate durability. You should always focus on the quality of a product before getting it. Make sure it’s sturdy and built to last. No matter whether it’s made of wood, metal, plastic, aluminum or steel.
3. Features: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
4. Customer Ratings: The hundreds of customers using the Miter Gauge For Dewalt Table Saw before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
5. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Miter Gauge For Dewalt Table Saw they used.
6. Seller Rank: Now, this is interesting! You don’t just need a good Miter Gauge For Dewalt Table Saw, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
7. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Miter Gauge For Dewalt Table Saw before putting them on the list.
8. Durability: Durability and reliability go hand to hand. A robust and durable Miter Gauge For Dewalt Table Saw Roofing will serve you for months and years to come.
9. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Miter Gauge For Dewalt Table Saw if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
10. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Miter Gauge For Dewalt Table Saw on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Miter Gauge For Dewalt Table Saw on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we’re always updating our website to provide timely and relevant information.

Conclusion

Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Miter Gauge For Dewalt Table Saw featured here incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.